APT Pool Slicing Salmon II 5’2

CHF 699.00 inkl. MwSt

Nicht auf Lager

  • Bis 15 Uhr bestellt, morgen geliefert
  • Kostenloser Versand ab 70 CHF (ausser Sperrgut)
  • 14 Tage Rückgaberecht

Beschreibung

The super fast and agile Slicing Salmon delights pool surfers of all skill levels. The thinner rails in combination with the narrower nose shape enable radical turns and hacks. The deep single concave gives extra speed and grip for powerful surfing. The tailkick gives the board additional pop for airs, 360s, reverses and pop shuvits.

Vincent Schneider and Corinne Hafen took first place with this shape at the Swiss Wavepool Championships 2020.

The Foam
For the APT pool boards, we use a high-density EPS foam that is foamed in a form. The main advantage of an EPS foam is its excellent stability and low weight. This extends the life of the foam and gives you a surfboard with a long-lasting and lively flex. In comparison, the flex of a PU board decreases rapidly over the years.

The Innegra fiber frame
The entire rail of the board is reinforced with an Innegra frame. The material is extremely impact-resistant and has very good flex properties. Due to the improved flex of the rails, the board has very good torsional rigidity. This makes the board extremely responsive and generates extra speed in the turns.

The epoxy laminate
The board is glazed with a UV resistant epoxy resin system. The resin used is more environmentally friendly compared to polyester resin and also extends the lively flex behavior by 2-3 times. Under the front foot we use an additional layer with biaxial fabric that transmits the driving impulses directly to the rails.

The fin plugs
The FCSII fin plugs used are laminated with a hard foam coating. In the construction used, the plugs are still connected to the deck of the board. For the laminate we use 2 layers of fiberglass and one layer of Innegra fiber.

Durability and repairs
The APT pool surfboard is very durable thanks to the use of high-tech materials. However, it is not completely protected against ding. In the event of damage, the area to be repaired should first be dried and then repaired with epoxy resin. As with any surfboard, excessive heat should be avoided (e.g. oven conditions in a closed car on a sunny day in summer).

Testboards
Still not sure which board to buy? Or do you just want to try a board? If you want to test a board, you will be credited up to CHF 150 when you buy a new board.
You can rent the following pool surfboards in our shop in Zurich:
APT Poolsurfboard Slicing Salmon II 5’2, 5’3, 5’4
APT Poolsurfboard Tactical Tuna II 5’2, 5’4

Facts

  • Size: 5’2 x 18 3/4 x 2 1/8
  • Volume: 23.2 L
  • Outline: Round, small wave
  • Tail: Round square
  • Wave: 0-3 feet
  • Finsystem: FCS II, hard foam, Innegra-Vectornet
  • Riders weight: 50-80 kg
  • Surfer: Beginner / intermediate / expert
  • Extremely stable epoxy Innegra construction
  • Weight: 2.2 kg

Produktbewertungen

Es gibt noch keine Bewertungen.

Warenkorb

×

Es befinden sich keine Produkte im Warenkorb.

schliessen
Visitorstore_APT_Pool_Slicing_Salmon_II_5_2_Back
Visitorstore_APT_Pool_Slicing_Salmon_II_5_4_Back_2
Visitorstore_APT_Pool_2
Visitorstore_APT_Pool_1
schliessen

Dein Produkt wird zum warenkorb hinzugefügt